Mitel 5604 Uživatelská příručka stáhnout pdf (Strana 82)

Mitel 5604 Wireless Handset User Guide

3. Switch off the new handset by long pressing .

Easy Replacement Procedure

During the Easy Replacement procedure, the LEDs of the handset and the charger follow the

same LED indications. This means that if the old handset has a broken display, the LED

indications on the charger and on the handset can be used to follow the replacement procedure.

Before and after easy replacement, the LEDs may have different LED indications. For more

details, see “LED Indications during Easy Replacement” on page 75.

IMPORTANT: Never remove a handset from the charger until the instructions in the

display or the LED tells you to do so. (See the status on the LED if the display is broken).

If an error is indicated you may be able to remove the handset. See the Mitel 5604 Wireless

Handset Configuration Guide for further instructions.

After you place the old handset in the charger, you must place the new handset in the

charger, regardless of whether the replacement was successful or not. Failing to do so

may result in malfunction and the new handset will need servicing.

Figure 13: Easy Replacement using the 5604 Programmer

1 On the new handset, press and hold

Note: Do not release until you are instructed to do so.

2 Put the new handset in the charger.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 88

Žádné komentáře

Mitel 5604 Uživatelská příručka Strana 82